Ferrari reveals 458 Challenge

Ferrari has taken the wraps off its new 458 Challenge race car at today’s Bologna motor show, a lighter and faster version of its mid-engined supercar that will join the grids in one-make race series from 2011.

The 458 Challenge has the same direct-injection, 4.5-litre V8 powerplant as the regular car, producing 562bhp at 9000rpm.

The gains for track use come through revised gear ratios and recalibration of the 458's F1 gearbox, plus a major push to save weight.

See the official pics of the new Ferrari 458 Challenge race car

Ferrari has reduced the thickness of the 458's body panels, and made greater use of lightweight materials such as carbonfibre and Lexan. The firm has declined to quote a weight figure for the new car, however.

The Challenge's chassis set-up features stiffer springs, single-rate dampers, 19in racing wheels, larger Pirelli slick tyres and a lower ride height (down by 50mm). It also has Brembo CCM2 brakes, as seen on the 599XX.

The new model also gets Ferrari's E-Diff electronic differential and F1-Trac, its traction control system, the first time these set-ups have been offered on one of the firm's track cars.

Read Autocar's full road test of the Ferrari 458 Italia

Ferrari claims that the 458 Challenge can generate lateral forces of up to 1.6g, and that it laps the firm's Fiorano test circuit in 1m 16.5sec; that's two seconds faster than the F430 Challenge car. That’s also 8.5sec quicker than the 458 road car, although its time was set on slick tyres.

The 458 Challenge will be the fifth car to compete in the Ferrari Challenge Trofeo Pirelli; it will take on F430s, 360s, F355s and 348s.

Ferrari Enzo

When it comes to the successor for the Ferrari Enzo we’ve heard all kinds of rumors. However, we can now clear some of those up as Ferrari S.p.A. Chairman, Luca Cordero di Montezemolo, himself not only talks about the future car, but also about the company’s future.

The next Enzo will be revealed in 2012 and it "will incorporate the state of the art of our knowledge in terms of increasing performances while reducing fuel consumption and emissions. It will then influence all Ferraris that appear after it." Under the hood there will be the same gasoline-hybrid technology that is found in the Vettura Laboratorio HY-KERS concept that was unveiled in March at the Geneva Auto Show. As for the car’s design language, it was previewed in 2007 by the Millechili concept.

Luca Cordero di Montezemolo also confirmed that Ferrari will be about "fast cars and fast trains – and no politics", and that despite his 63 years of experience in life, he will continue working for Ferrari: "I want to shape the next product cycle at Ferrari to assure a bright future at a company that has been inextricably intertwined with my life."

Ferrari

Ferrari has plenty in the pipeline, and not just off in the distant future, either. There's a 599 roadster that was shown in secret during this year's Pebble Beach festivities, as well as a handful of 458 derivatives on their way. And that's just the start. Now comes word that the automaker has something big planned for this year's Paris Motor Show.

According to reports coming in from Italy, Ferrari is preparing to unveil another environmentally friendly prototype, similar in concept to the 599 HY-KERS displayed in Geneva earlier this year. This time, though, it'll be a different car and won't use hybrid technology.

Early speculation indicates we'll be seeing a prototype based on the California, but how it differs from the model currently on sale remains to be seen. Instead of a hybrid or start-stop system, reports suggest that Ferrari could be tinkering with such innovations as reducing internal engine friction, cylinder deactivation, streamlined aerodynamics for lower drag and the further use of advanced composites to reduce weight.

Whatever Maranello has in store, we'll find out soon enough when the show opens at the Porte de Versailles later this month.

Ferrari F40

There's something special about seeing a supercar in person, and it's a once in a lifetime event to see several in the same place. It's for that reason we're big fans of supercar reunions. Last year, as part of the Monterey Classic Car Week festivities, Concorso Italiano hosted a Ferrari 288 GTO reunion as part of the car's 25th anniversary, and an incredible fifteen examples showed up, making it the largest gathering ever.

Concorso plans to outdo itself this year with another Ferrari reunion, this time with the F40. More than a dozen owners have already signed on to bring their cars, and we fully expect plenty more to be on hand come August 13th. In fact, the event organizers hope to have more than 40 examples in attendance. The F40's project director, Leonardo Fioravanti, is also scheduled to make an appearance.

If you're a big fan of the F40 or even just Italian supercars in general, then start making your plans to be in Monterey in a little over four months.

Ferrari 599 GTO

We've seen the spy shots. We've even seen the options list. Now Ferrari has officially taken the wraps off its new performance benchmark, the 599 GTO, ahead of the car's official debut later this month at the Beijing Motor Show.

Sort of a street-legal stepping point between the production 599 GTB Fiorano and the track-only 599XX, the 599 GTO evokes the famous Gran Turismo Omologato designation made famous by the legendary 250 GTO of the 1960s and the muscle-bound 288 GTO of the 1980s. That's quite a legacy to follow, so it's a good thing the 599 GTO brings the goods.

Output from the 6.0-liter V12 – itself derived from the Enzo's engine – is up from 612 horsepower to 661, with torque up a modest 9 lb-ft to 457. Coupled with a 195 kilogram (430 lb) weight reduction program – now tipping the scales at 1495 kg (3295 lbs), the leaner and meaner 599 can sprint to 62 miles per hour from a standstill in a scant (and very specific) 3.35 seconds, with a top speed in excess of 208 mph, while lapping the Fiorano test track from which its donor's name is derived in a blitzing 1 minute, 24 seconds. That's faster than the Enzo, people.

The GTO is also treated to more aerodynamic bodywork, including a new front splitter, side sills, diffuser and rear spoiler. The vented hood is new as well, as are the ten-spoke, 20-inch rims with F1-derived wheel donuts aiding aero efficiency.

Piquing your interest yet? Don't get too excited. As the new flagship in Ferrari's range, the 599 GTO is reported to fetch a price tag approaching £300,000 overseas (equivalent to nearly $460k). Only 599 examples will be offered, which is still more than the Enzo whose performance it eclipses. Follow the jump for the official press release.

Ferrari 599 HY-KERS

Onlookers green with envy. Waiting twitchingly for the traffic light to turn green. A briefcase full of greenbacks. Even British Racing Green, if you're talking about a GT. You could find a few ways to associate Ferrari with the color green, but the environmental sense would be a bit of a stretch – historically speaking, at least. But the times, as one Mr. Zimmerman wrote, they are a-changing. Now even Maranello has been forced to get on board the "Heal the World" train. And this is the result.

Called the HY-KERS, what you're looking at is a rolling test bed. It's a hybrid, sure, but if you thought this was a haphazard application of a plug-and-play hybrid system, think again. The HY-KERS incorporates a roadgoing derivative of Ferrari's Kinetic Energy Recovery System – fancy-talk for regenerative braking – from last year's Formula One program.

Ferrari has worked diligently to optimize the benefits of the system to the 599's performance. The entire system weighs a modest 40 kilograms, partially offset by the obviation of the starter motor and conventional battery. Integrated into the seven-speed dual-clutch transmission and mounted below the car's center of gravity, the system returns over 100 horsepower, supplementing the V12 engine under hard acceleration and it can even operate under full electric power when puttering around town. Of course, a Ferrari never putters around anything, save for when it takes its owner for a round of golf at the local country club.

FERRARI DEBUTS AT GENEVA WITH THE HY-KERS, A 'VETTURA LABORATORIO'

Geneva, 2 March 2010. Ferrari presents a vettura laboratorio (experimental vehicle) at the 80th edition of the Geneva Motor Show based on the 599 GTB Fiorano equipped with an advanced new hybrid transmission.

Hybrid technology is one of the solutions examined by Ferrari in its on-going research and development into making its production cars ever more efficient. Experimenting with alternative technologies represents the company's long-term strategy after the announcement in 2007 of a five-year plan to reduce fuel consumption and emissions across the range. With the launch of the Ferrari California (2008) and the 458 Italia (2009), in fact, Ferrari's average fuel consumption and CO2 emissions figures have already been reduced by around 30 per cent compared to 2007.

The HY-KERS displayed at the Geneva Motor Show is an example of how Ferrari is studying the application of hybrid technology to high-performance sports cars. Central to Ferrari's objectives is maintaining the balance, handling and performance characteristics typical of its cars despite the inevitable disadvantages in terms of weight represented by applying hybrid solutions to existing models.

To this end Ferrari has employed its racing experience to adapt a lightweight hybrid drivetrain to the 599 GTB Fiorano with the aim of ensuring that vehicle dynamics are unaffected. This was achieved by the careful integration of all system components, positioning them below the centre of gravity and ensuring that interior and luggage space are entirely unaffected. Similarly the flat lithium-ion batteries are positioned below the floorpan of the car inside the aerodynamic underbody. The result is a centre of gravity that is even lower than in the standard car. In addition, a part of the weight gained by fitting the electric motor, generator and the batteries is offset by being able to do away with the traditional starter motor and battery.

Ferrari has also applied its F1 technology to the design, engineering and construction of a new kind of electric motor which also helps optimise the longitudinal and lateral dynamics of the car, enhancing traction and brake balance. The motor cuts in during acceleration, providing instantaneous torque when moving away from a standstill and during overtaking manoeuvres, with torque control a function of grip, gear and accelerator pedal angle. Depending on vehicle speed and engine load – for example in town driving – the hybrid system can also function as a full-electric drivetrain. The result is a direct reduction in consumption and emissions. The motor also features a unique cooling and lubrication system for maximum efficiency under all operating temperatures and loads. The castings of the motor are made in the Ferrari foundry, complete with Prancing Horse motif.

Weighing about 40 kg, the compact, tri-phase, high-voltage electric motor of the HY-KERS is coupled to the rear of the dual-clutch 7-speed F1 transmission. It operates through one of the transmission's two clutches and engages one of the two gearbox primary shafts. Thus power is coupled seamlessly and instantaneously between the electric motor and the V12. The electric motor produces more than 100 hp as Ferrari's goal was to offset every kilogram increase in weight by a gain of at least one hp.

Under braking the electric drive unit acts as a generator, using the kinetic energy from the negative torque generated to recharge the batteries. This phase is controlled by a dedicated electronics module which was developed applying experience gained in F1 and, as well as managing the power supply and recharging the batteries, the module also powers the engine's ancillaries (power steering, power-assisted brakes, air conditioning, on-board systems) via a generator mounted on the V12 engine when running 100 per cent under electric drive. It also incorporates the hybrid system's cooling pump.

In keeping with Ferrari's 360-degree approach to efficiency and its commitment to environmental sustainability, new technologies for its road cars are matched by the considerable investments already made to reduce the environmental impact of the company's production activities in Maranello.

After the inauguration of the photovoltaic installation on the roof of the Mechanical Machining facility in January 2009, which reduced the factory's power requirements by over 210,000 kWh annually, 2009 also saw the opening of the trigeneration plant (the simultaneous production of power, heat and cooling from a single source) – the first of its kind to be implemented by a sports car manufacturer. This enabled Ferrari to reduce CO2 emissions by 15 per cent, with the goal of reaching a reduction of over 40 per cent by the end of 2010. Thanks to these ecological solutions, Ferrari is completely autonomous for its energy requirements.